1).42.5R(42.5) Common silicate
This product is produced under the National Standard
GB175-1999 of "Silicate Cement, Common Silicate Cement", and
92% excellent silicate cement clinker, 8% excellent eruption
and 4% gypsum compose it with grinding technics, and had
passed the strict quality test before leaving factory. At
present, this kind of the product has passed the certificat-
ion of the China Cement House Building Material Product Anthentication. The three-day anti-
pressure intension is over 26 mega-pascal, eight-day anti-pressure intension is over 49 mega-
pascal, and the final coagulating time is less than 6.5 hours.
The main character is:
The early intension is high, and coagulation and hardening speed is fast.
It is anti-freezing and wearable, and has good water-resistance.
It is apply to:
universal overgound project and the underground project, which is affected by the corrasi-
ve action;
non-corradent underwater cold-endouring project;
the early high-intension requested project;
the project under the low temperature condition and the intension capacity should founcti-
onquickly,
Compound the high grade concrete project relatively
 
2). 32.5(32.5R) common silicon cement
This product is produced under the National Standard
GB175-1999 of "Silicate Cement, Common Silicate Cement". 88%
excellent silicon cement clinker, 9% excellent eruption, 3%
mine refuse, and 4% gypsum compose it with grinding technics
and had passed the strict test. This kind of the product has
passed the certification of the China Cement House Building
Material Product Anthentication. The three-day anti-pressure intension is over 20-megapascal,
eight-day anti-pressure intension is over 39-mega-pascal, and the final coagulating time is
less than 6.5 hours. The main capacity and the range of application is the same as the 42.5R
common cement.
 
3). 22.5 laying cement
This product is produced under the National Standard
GB/T3183-2003 of "Silicate Cement, Common Silicate Cement",
and 47% excellent silicate cement clinker, 53% fly ash and
4% gypsum compose it with grinding technics, and had passed
the strict quality test before leaving factory. The twenty-
eight intention is over 34.95-mega-pascal, and the final
coagulate time is less than 10 hours.
The mainly character is:
low water demand, good placeability; small dry shrinkage Low hydration heat Good
corrosion resistance Low intensity in early stage and high promotion rate of intensity in
later stage Scope of application: All sorts of architecture engineering of industry and
civil Big capacity concrete works Underground works and corrosive medium engineering,?
If every consumer is doubt on the quality of cement during the course of using, you can call
0535-6461179 to complain or you can feedback by sales clerk or directly complain to the
company.
 
版权所有©  烟台塔峰实业有限总公司